Three-coordinated measuring machine + laser scanner
DEA Global Performance 9.15.8 for measuring of general areas included point shooting, continuous scan or laser scan.
Measuring machine allows basic measurement of external and internal gearing.
- Extent X [ mm ] 900
- Extent Y [ mm ] 1500
- Extemt Z [ mm ] 800
Measurement error in accordance with ISO / IEC 10360-2
Leitz LSP- X1
- MPEE max. measurements default (1.8 + L/333 ) micron
- MPEP mistake of 1.8 micron scan
- MPE- THP error scanning with 2.9 μm/68
- The laser probe scan CMS106 ± 20 micron
Measuring SW PC- V2013 DMISTM CAD + + for geometric measurements with direct links to CAD / CAM
SW Test Gear 2.5 for measuring the basic parameters of external and internal gearing is fully compatible with PC- DMIS software
Optical 3D CNC measuring device
Model Optiv Classic 321GL , PCDMIS Vision for contactless measurement with high precision CCD camera for capturing,
Bottom LED backlight, coaxial top lighting, LED lighting upper segment
Minimum measuring range:
- X axis [ mm ] 300
- Y -axis [ mm ] 150
- Z axis [ mm ] 130
Accuracy of measurement - linear optical measurement uncertainty according to ISO 10360-7
- E1x , y ± (1.6 + L/250 ) micron
- E2x , y ± (2.0 + L/250 ) micron
- E1z ± (3.9 + L/250 ) micron
Measuring SW PC- DMIS Vision
Universal digital measuring instrument
Laboratory length measuring instrument TRIMOS Labconcept Premium 1000B for measuring internal and external dimensions with high accuracy.
Equipped with a wide variety of accessories allow inspection of all types of instruments.
- Scope - outside measurement 0 to 1000 mm
- Internal measurements from 1 mm
- Accuracy ± ( 0.15 + L ( mm) / 2000) micron
Measuring SW WinDHI for all measurement functions
Hommel - roundness Etamic roundcan 555 HR -set
To measure the roundness and all parameters deviations of form and position , including the evaluation of cone-shaped in CNC mode.
- Measuring height 550 mm
- Measuring diameter of 390 mm
- Max. diameter of testing piece 740 mm
- Roundness 0.02 + 0.0005 micron height measurement
- Axial run out 0.03 + 0.0005 micron / mm measured radius
- Z -axis straightness deviation of 0.25 mm μm/100
- R axis straightness deviation of 0.15 mm μm/100
TURBO FORM evaluation software for Windows
Profilemeter, Surface Roughness Tester Hommel T8000 RC - Etamic 120-400
Roughness and contour of the external and internal surfaces .
Measuring SW TURBO WAVE for evaluation profile.
Measuring SW TURBO WAVE for evaluation of surface roughness parameters.
- Max . displacement in Z-axis 400 mm
- The path X axis 100 mm
- Lifting straps measuring 230 mm min 50 mm
- Shifting speed in the evaluation of 0.0 to 2.0 mm / s by 0.01 mm / s
Measuring SW TURBO WAVE for evaluation profile :
- Calculating of angles, shapes, sizes, radius, distances in any order
- Tilt compensation hangers and radius stylus
- Possibility of comparing the measured profile CAD
Measuring SW TURBO WAVE for evaluation of roughness parameters:
- Calculation of the actual roughness parameters according to standards
Digital Micrometer SUPERBORE
For accurate measurement of small diameters with evaluation using digital imaging .
Units D100S enabling a digital display of measured values , input and evaluation of tolerance , statistical evaluation of measurement etc.
DC power supply Agilent 6680 .
Power DC power supply with variable output voltage 0-5 V DC output current from 0 to 875 A
- Measuring range 2-6 mm
- Resolution 0.000 1 mm
- The accuracy of 0.001 mm